Operator Panel Operation
4.5.5
Setting the screen saver
The starting time of the screen saver on the operator panel is set.
1) First, select the [Screen Saver] button from the SETUP menu.
2) For the time (minutes) in which the screen saver activates, select the Ten Key button
3) A confirmation message window is displayed.
4) A window indicating that processing is under way is displayed. If the display
4-38
SETUP menu
+Screen Saver
and make an entry using the numeric keypad. When the entry is complete, select the
[OK] button.
The time that can be entered is 1 to 99 minutes.
Select the [OK] button if it is OK to proceed. Selecting the [CANCEL] button
displays the input window.
switches to an end message, the setting is completed.
Remarks:
C144-E072-01EN