Changing The Pitch As With A Tremolo Arm (T-Arm) - Roland V-Bass VB-99 Owner's Manual

Chapter 7 Other Functions
pedal, MIDI device, or any of a variety of other controllers.
Changing the Pitch as with a
Tremolo Arm (T-ARM)
You can press the D BEAM or RIBBON CONTROLLER [PITCH]
button to use T-ARM, which changes the pitch of the COSM bass like
a tremolo arm.
1.
Press [CONTROL ASSIGN]
2.
Press PAGE [ ] [
Beam, or Page 3 for the ribbon controller.
3.
Press [F1] (PITCH).
4.
Press PAGE [ ] to go to Page 1.
5.
Select T-ARM with [F1] (SELECT) or the F1
knob.
The D BEAM T-ARM or the RIBBON T-ARM screen appears.
* This step is not necessary if you are using the ribbon controller. In
this case, proceed to Step 5.
6.
Use [F2] (SELECT) or the F2 knob in the D
Beam screen or [F1] (SELECT) or the F1 knob
in the Ribbon Controller screen to select the
channel to which you want to apply the effect.
7.
Set each of the T-ARM parameters on Page 1
or Page 2
74
] to go to Page 2 for the D
For more detailed information on the parameters that can be set,
refer to "PITCH" (p. 136), (p. 138).
8.
Press [EXIT] several times to return to the Play
screen.
9.
Press the D BEAM or RIBBON CONTROLLER
[PITCH] button, causing the indicator to light.
10. Use the D Beam or ribbon controller like a
tremolo arm to change the pitch.
* With D BEAM:T-ARM:SW or RIBBON:T-ARM:SW and "
BEAM:T-ARM:CONTROL and RIBBON:T-ARM:CONTROL set
as the target in Control Assign, you can control the T-ARM effect
using an external pedal, MIDI device, or any of a variety of other
controllers.