Overview Of Management And Control Commands; A Sample Of Hierarchical Structure Command - IBM Nways 8260 Manual

8. The two previous points mean that the more monitoring required on 8250
9. ShuntBus based segments are not manageable by 8250 xMM.

4.6 Overview of Management and Control Commands

Commands used in the 8260 hub can be organized into hierarchical or layer like
structures. When you first log in to the 8260 hub with the system user ID,
commands in the first layer will be available. Commands may have various
parameters or options associated with them. For example, in Figure 41, all
commands in the second layer are the available options associated with the set
command. Default_gateway, ip_address and subnet_mask are the possible
options associated with the ip option and the set command in the second and
first layers in respectively.
Figure 41. A Sample of Hierarchical Structure Command
In the remainder of this book, the DMM commands will be covered as we
discuss various components of the 8260.
segment. If multiple 8250 networks need to be monitored simultaneously
then each network requires its own 8250 xMM.
networks the fewer payload slots are available for media modules.
Chapter 4. 8260 Distributed Management Architecture
71