Displaying The Status Of Rem Options; Displaying The Status Of Crs Options - IBM Nways 8260 Manual

8260A> show tr_surrogate 8.2 rem_status
Ring Error Monitor Status Data for Network TOKEN_RING_7
-----------------------------------------------------------------------------
REM Traps:
Weight Exceeded Traps:
PreWeight Exceeded Traps:
Receiver Congestion Traps:
NonIso Threshold Exceeded Traps: DISABLED
Forward Frames Traps:
Ring Line Error Data:
Ring Internal Error Data:
Ring Burst Error Data:
Ring AC Error Data:
Ring Abort Xmitted Error Data:
Ring Lost Frames Error Data:
Ring Receiver Congestion Data:
Ring Frame Copied Data:
Ring Frequency Error Data:
Ring Token Error Data:
Auto Line Error Data:
Auto Internal Error Data:
Auto Burst Error Data:
Auto AC Error Data:
Auto Abort Xmitted Error Data:
Auto Lost Frames Error Data:
Auto Receiver Congestion Data:
Auto Frame Copied Data:
Auto Frequency Error Data:
Auto Token Error Data:
Ring State:
Reset:
8260A>
Figure 134. Displaying the Status of REM Options
Status of CRS options
SHOW TR_SURROGATE {slot.subslot} CRS_STATUS
An example of the output from this command is shown in Figure 135.
8260A> show tr_surrogate 8.2 crs_status
Configuration Report Server Status Data for Network TOKEN_RING_7
-----------------------------------------------------------------------------
CRS Traps:
NAUN Changes:
Active Monitor Changes: 0
Tx Forward Strip Status: 0000
8260A>
Figure 135. Displaying the Status of CRS Options
Status of CRS Stations options
SHOW TR_SURROGATE {slot.subslot} CRS_STATION ALL
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
Normal
Reset Complete
DISABLED
0
Chapter 10. 8260 RMON Support
235