Managing 8260 Using Dmm And 8250 Xmm; Output From T-Mac Display - IBM Nways 8260 Manual

Figure 40. Output from T-MAC Display
Note that this example shows that although we have assigned a locally
administered MAC address to T-MAC, it is still using the burned-in MAC
address. This display also shows the IP address, subnet mask, and default
gateway for T-MAC which is that of the token-ring segment to which this T-MAC
is assigned.

4.5 Managing 8260 Using DMM and 8250 xMM

This section will explore managing the 8260 hub and its networks using different
combinations of 8260 and 8250 management and media modules. There are
three possible scenarios for managing an 8260:
8260A> show module 6.2 verbose
Slot Module Version Network
----- --------------- ------- ------------- -------------------
06.02 T-MAC v2.00
T-MAC: Token Ring Network Monitor Card
Boot Version:
IP Address:
Subnetwork Mask:
Default Gateway:
Station Address:
Locally Administered Address:
MAC Address Type:
Interface Mode:
RMON Groups:
Surrogate Groups:
Dot5 Group:
RMON Host Statistics Collection:
RMON MAC Layer Statistics Collection:
RMON Promiscuous Statistics Collection: DISABLED
RMON Ring Station Statistics Collection: DISABLED
RMON Source Routing Statistics Collection: DISABLED
Monitor Contention:
Adapter Status:
Adapter Microcode Version:
Early Token Release:
Internal Wrap:
External Wrap:
Interface Number:
8260A>
1. Managing 8260 with only a D M M
2. Managing 8260 with only 8250 management module(s) and no D M M
3. Managing 8260 with a D M M as well as 8250 management module(s)
Note
The second method is not recommended but will be looked at.
General Information
TOKEN_RING_10
v2.00
9.67.46.235
ff.ff.ff.f0
9.67.46.238
10-00-f1-0b-09-5f
40-00-00-82-60-a1
BURNED-IN
ENABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
ENABLED
OPENED
00 00 01 c1 e3 f1 f7 c3 f1 40
DISABLED
DISABLED
DISABLED
5
Chapter 4. 8260 Distributed Management Architecture
69