Lms Ospf Static Filter Table Panel - IBM Nways 8260 Manual

Figure 180. LMS OSPF Static Filter Table Panel
13. You may define a conversion table that contains information for converting
302
8260 Multiprotocol Intelligent Switching Hub
Config * OSPF Static Filter Table
System
IP Address IP Mask
Add Entry
Return to the previous screen
This panel allows you to define the following parameters for each filter entry:
IP Address
This parameter specifies the destination IP address.
IP Mask
This parameter specifies the mask associated with the IP address.
TOS
This parameter specifies the Type Of Service for this route.
Action
This parameter specifies whether to import a route in case of a match.
static route s hop count to an OSPF s metric for each configured pair of
destination IP address and its mask. To do so, select OSPF Static Convert
Table from the OSPF Menu . An example of the resulting panel is shown in
Figure 181 on page 303.
Module: BladeRunner
Page 1 Time:
TOS
Prev Page Next Page
17:47 11 Jan 95
Action
Exit