Show Counter Repeater For Ethernet Segment - IBM Nways 8260 Manual

Multiprotocol intelligent switching hub
Table of Contents

Advertisement

8260A>
8260A> show counter repeater ethernet_1 module 2
Repeater Statistics for Module 2 on ETHERNET_1
-----------------------------------------------------------------------------
Readable Frames
Readable Octets
Runts
FCS Errors
Late Events
Short Events
Frame Too Longs
Very Long Events
Alignment Errors
Collisions
Data Rate Mismatches
Auto Partition Count
8260A>
Figure 120. Show Counter Repeater for Ethernet Segment
Note: With the current release of the DMM code, we could not display this
information about the 8250 Ethernet modules, regardless of where the E-MAC
was installed.
4. Display RMON host statistics
You can display the RMON Host group for stations attached to a segment
using the following command:
SHOW COUNTER RMON HOSTS {network} {all | mac_address}
An example of the output displayed for this command is shown in Figure 121
on page 218.
0
0
0
0
0
0
0
0
0
0
0
0
Chapter 10. 8260 RMON Support
217

Advertisement

Table of Contents
loading

Table of Contents