Surrogate Functions Supported By T-Mac; Show Module Command For T-Mac - IBM Nways 8260 Manual

Figure 132. Show Module Command for T-MAC
6. Once the T-MAC is enabled to collect the appropriate RMON group, you can

10.7 Surrogate Functions Supported by T-MAC

The token-ring architecture defines the Configuration Report Server (CRS) and
Ring Error Monitor (REM) functions.
The Ring Error Monitor (REM) observes, collects, and analyzes hard-errors and
soft-error reports sent by the ring stations on a single ring and assists in fault
isolation and correction. Configuration Report Server (CRS) function accepts
commands from the LAN manager to get station information, set station
232
8260 Multiprotocol Intelligent Switching Hub
8260A>
8260A> show module 8.2 verbose
Slot Module Version Network
----- --------------- ------- ------------- -------------------
08.02 T-MAC v2.00
T-MAC: Token Ring Network Monitor Card
Boot Version:
IP Address:
Subnetwork Mask:
Default Gateway:
Station Address:
Locally Administered Address:
MAC Address Type:
Interface Mode:
RMON Groups:
Surrogate Groups:
Dot5 Group:
RMON Host Statistics Collection:
RMON MAC Layer Statistics Collection:
RMON Promiscuous Statistics Collection: ENABLED
RMON Ring Station Statistics Collection: ENABLED
RMON Source Routing Statistics Collection: ENABLED
Monitor Contention:
Adapter Status:
Adapter Microcode Version:
Early Token Release:
Internal Wrap:
External Wrap:
Interface Number:
8260A>
As can be seen, at the time of display, all the RMON groups are enabled on
the T-MAC.
display the collected information using the following command:
SHOW COUNTER RMON {rmon group} {network}
This command is described in 10.6.5, "SHOW COUNTER Command for
Token-Ring Networks" on page 222.
General Information
TOKEN_RING_7
v2.00
9.67.46.195
ff.ff.ff.f0
0.0.0.0
10-00-f1-0b-58-00
00-00-00-00-00-00
BURNED-IN
ENABLED
ENABLED
DISABLED
DISABLED
ENABLED
ENABLED
DISABLED
OPENED
00 00 01 c1 e3 f1 f7 c3 f1 40
DISABLED
DISABLED
DISABLED
6