Special Notices - IBM Nways 8260 Manual

Special Notices

This publication is intended to help both IBM Customers and IBM System
Engineers to install and configure the IBM 8260 Multiprotocol Intelligent
Switching Hub. It contains description of the 8260 architecture as well as
information about how to install, configure and manage the the 8260 Ethernet
and token-ring modules. The information in this publication is not intended as
the specification of any programming interfaces that are provided by IBM 8260
Multiprotocol Intelligent Switching Hub. See the PUBLICATIONS section of the
IBM Programming Announcement for the 8260 for more information about what
publications are considered to be product documentation.
References in this publication to IBM products, programs or services do not
imply that IBM intends to make these available in all countries in which IBM
operates. Any reference to an IBM product, program, or service is not intended
to state or imply that only IBM s product, program, or service may be used. Any
functionally equivalent program that does not infringe any of IBM s intellectual
property rights may be used instead of the IBM product, program or service.
Information in this book was developed in conjunction with use of the equipment
specified, and is limited in application to those specific hardware and software
products and levels.
IBM may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license to
these patents. You can send license inquiries, in writing, to the IBM Director of
Licensing, IBM Corporation, 500 Columbus Avenue, Thornwood, NY 10594 USA.
The information contained in this document has not been submitted to any
formal IBM test and is distributed AS IS. The information about non-IBM
(VENDOR) products in this manual has been supplied by the vendor and IBM
assumes no responsibility for its accuracy or completeness. The use of this
information or the implementation of any of these techniques is a customer
responsibility and depends on the customer s ability to evaluate and integrate
them into the customer s operational environment. While each item may have
been reviewed by IBM for accuracy in a specific situation, there is no guarantee
that the same or similar results will be obtained elsewhere. Customers
attempting to adapt these techniques to their own environments do so at their
own risk.
Any performance data contained in this document was determined in a
controlled environment, and therefore, the results that may be obtained in other
operating environments may vary significantly. Users of this document should
verify the applicable data for their specific environment.
Reference to PTF numbers that have not been released through the normal
distribution process does not imply general availability. The purpose of
including these reference numbers is to alert IBM customers to specific
information relative to the implementation of the PTF when it becomes available
to each customer according to the normal IBM PTF distribution process.
The following terms are trademarks of the International Business Machines
Corporation in the United States and/or other countries:
xv
Copyright IBM Corp. 1995