Collecting And Displaying Rmon Groups Using E-Mac; Show Counter Rmon Hosts - IBM Nways 8260 Manual

Figure 121. Show Counter RMON Hosts

10.6.4 Collecting and Displaying RMON Groups Using E-MAC

DMM (and E-MAC) allow you to collect the following RMON groups for the
Ethernet segments in your 8260:
218
8260 Multiprotocol Intelligent Switching Hub
8260A>
8260A> show counter rmon hosts ethernet_1 all
RMON Hosts Table for Host Address 00-00-c9-01-01-0b on Port 2.4
-----------------------------------------------------------------------------
Received Packets
Received Octets
Transmitted Packets
Transmitted Octets
Transmitted Errors
Transmitted Broadcast Packets
Transmitted Multicast Packets
RMON Hosts Table for Host Address 80-00-7a-00-00-a0 on Port 0.0
-----------------------------------------------------------------------------
Received Packets
Received Octets
Transmitted Packets
Transmitted Octets
Transmitted Errors
Transmitted Broadcast Packets
Transmitted Multicast Packets
-- More --
8260A>
In order to be able to collect the above statistics, you must have enabled
RMON Host group collection using the following command:
SET RMON HOST INTERFACE {index}
Where index is the index number associated with the E-MAC attached to the
network to be monitored. This index number can be displayed using the
"SHOW INTERFACE" command.
Note: If the E-MAC is mounted on EC-DMM, you will be able to collect the
above statistics about stations attached to both 8260 and 8250 modules.
However, if the E-MAC is installed on an 8260 media module the statistics
will only be collected for stations attached to the 8260 modules.
Host
History
Alarm
Event
Matrix
136
8704
190
13132
0
0
54
222
19376
0
0
0
0
0