Display Of Defined Dmm Users - IBM Nways 8260 Manual

Figure 20. Display of Defined D M M Users
A superuser can delete entries for other users with the following command:
8260A> clear login {index | all}
Where index is as shown in Figure 20.
There can be up to a maximum of 10 users (any combination) defined in a DMM.
However, at any point in time, there can be only one user with write access
(administrator or superuser) logged in to a DMM. Therefore, if you try to log in
to DMM as an administrator or superuser, when there is already an
administrator (or a superuser) logged in to that DMM, you will be given a user
access. However, a superuser who is granted a user access in this way, can
use the example shown in Figure 21 on page 47 to force the termination of the
current session which has the write access (currently logged in administrator or
another superuser) and obtain the superuser access to DMM.
46
8260 Multiprotocol Intelligent Switching Hub
8260A> show login
Login Table:
Index Login Name
----- --------------- -------------- ---------------
1 system
2 shabani
3 admin1
4 user1
5 "not used"
6 "not used"
7 "not used"
8 "not used"
9 "not used"
10 "not used"
Active Login Sessions:
Login Name Session Type
---------- ------------
system Remote Super User
8260A>
Access Active Sessions
Super User 1
Super User 0
Administrator 0
User 0
Session Time
------------
0 days 00:15:27