Configuring System Wide Parameters; Lms Configuration Panel - IBM Nways 8260 Manual

Figure 141. LMS Configuration Panel
The following sections will describe the required steps for configuring these
features.

11.8.1 Configuring System Wide Parameters

The system wide parameters allow you to configure the following:
1. System Parameters
252
8260 Multiprotocol Intelligent Switching Hub
Config *
This panel will allow you to configure the following:
Name
Up to 64 characters used to uniquely identify the Multiprotocol
Interconnect module.
Location
Up to 64 characters used to identify the location of the Multiprotocol
Interconnect module.
Contact
Up to 64 characters used to identify the person responsible for the
Multiprotocol Interconnect module.
Station Time
Allows you to set the date and time for the Interconnect module.
Next Reset
Allows you to determine the action to be taken on the next Reset of the
module. The following can be specified:
Coldstart : All the configuration settings are set to the factory default.
Configuration Menu Module: BladeRunner
Time:
System Menu
Ports Menu
Bridge Menu
Protocols Menu
Exit
System parameters Menu
14:24 5 Jan 95