Show Counter Interface For Ethernet Segment - IBM Nways 8260 Manual

Figure 119. Show Counter Interface for Ethernet Segment
3. Display statistics about the traffic from an individual port/module
216
8260 Multiprotocol Intelligent Switching Hub
8260A>
8260A> show counter interface ethernet_1
Interface Statistics for ETHERNET_1
-----------------------------------------------------------------------------
Received Octets
Received Unicast Packets
Received Non-Unicast Packets
Received Discards
Received Errors
Received Unknown Protocols
Transmitted Octets
Transmitted Unicast Packets
Transmitted Non-Unicast Packets 4
Transmitted Discards
Transmitted Errors
8260A>
You can display the network statistics for an individual port or module using
the following command:
SHOW COUNTER REPEATER {network} MODULE {slot} or
SHOW COUNTER REPEATER {network} PORT {slot.port}
Note: These counters are not related to RMON.
An example of the output displayed for this command is shown in Figure 120
on page 217.
939978
8488
992
0
0
0
256
0
0
0