IBM Nways 8260 Manual page 211
Multiprotocol intelligent switching hub
Hide thumbs
Also See for Nways 8260:
- Installation instructions manual (25 pages) ,
- Installation instructions manual (54 pages) ,
- Installation manual (50 pages)
Table of Contents
Advertisement
Trunk ports can be enabled/disabled using the following command:
SET TRUNK {slot} RING_IN.n MODE {enable|disable} or
SET TRUNK {slot} RING_OUT.n MODE {enable|disable}
7. Enable/disable ports.
Each port can be enabled/disabled using the following command:
SET PORT {slot.port} mode {enable|disable}
189
Chapter 9. 8260 Token-Ring Modules
Advertisement
Table of Contents
