Displaying And Debugging Rmon - 3Com 5500-SI Configuration Manual

Displaying and
Debugging RMON
Table 561 Add/Delete an Entry to/from the Extended RMON Alarm Table
Operation
Add an entry to the extended
RMON alarm table.
Delete an entry from the
extended RMON alarm table.
Adding/Deleting an Entry to/from the Statistics Table
The RMON statistics management concerns the port usage monitoring and error
statistics when using the ports. The statistics include collision, CRC and queuing,
undersize packets or oversize packets, timeout transmission, fragments, broadcast,
multicast and unicast messages and the usage ratio of bandwidth.
You can use the following commands to add/delete an entry to/from the statistics
table.
Perform the following configuration in Ethernet Port View.
Table 562 Add/Delete an Entry to/from the Statistics Table
Operation
Add an entry to the statistics table
Delete an entry from the statistics table
After the above configuration, execute the
the running of the RMON configuration, and to verify the effect of the configuration.
Display and Debug RMON
Operation
Display the RMON statistics
Display the history information of
RMON
Display the alarm information of
RMON
Display the extended alarm
information of RMON
Display the RMON event
Display the event log of RMON
Command
rmon prialarm entry-number alarm-var [
alarm-des ] sampling-timer { delta | absolute |
changeratio } rising-threshold
threshold-value1 event-entry1
falling-threshold threshold-value2
event-entry2 entrytype { forever | cycle
cycle-period } [ owner text ]
undo rmon prialarm entry-number
Command
rmon statistics entry-number [ owner
text-string ]
undo rmon statistics entry-number
command in all views to display
display
Command
display rmon statistics [ port-num ]
display rmon history [ port-num ]
display rmon alarm [ alarm-table-entry ]
display rmon prialarm [
prialarm-table-entry ]
display rmon event [ event-table-entry ]
display rmon eventlog [ event-number ]
RMON Configuration 491