Creating A Hwtacas Scheme - 3Com 5500-SI Configuration Manual

616 C 33: HWTACACS C
HAPTER
Creating a HWTACAS
Scheme
ONFIGURATION
Table 671 HWTACACS configuration (continued)
Section Task
Setting the Setting the
Username username format for
Format the TACACS server
Acceptable to
the TACACS
Server
Setting the Unit Setting the data flow
of Data Flows unit for the TACACS
Destined for the server
TACACS Server
Setting Timers Setting the timers of
Regarding the TACACS server
TACACS Server
Pay attention to the following when configuring a TACACS server:
HWTACACS server does not check whether a scheme is being used by users when
■
changing most of HWTACACS attributes, unless you delete the scheme.
By default, the TACACS server has no key.
■
In the above configuration tasks, creating HWTACACS scheme and configuring
TACACS authentication/authorization server are required; all other tasks are optional
and you can determine whether to perform these configurations as needed.
As afore mentioned, HWTACACS protocol is configured scheme by scheme.
Therefore, you must create a HWTACACS scheme and enter HWTACACS view before
you perform other configuration tasks.
Perform the following configuration in system view.
Table 672 Creating a HWTACACS scheme
Operation
Create a HWTACACS scheme and enter
HWTACACS view.
Delete a HWTACACS scheme.
By default, no HWTACACS scheme exists.
If the HWTACACS scheme you specify does not exist, the system creates it and enters
HWTACACS view.
The system supports up to 16 HWTACACS schemes. You can only delete the schemes
that are not being used.
Command View
user-name- HWTACACS
format
data-flow-format HWTACACS
timer HWTACACS
response-timeout
timer quiet HWTACACS
timer realtime- HWTACACS
accounting
Command
hwtacacs scheme hwtacacs-scheme-name
undo hwtacacs scheme
hwtacacs-scheme-name
Description
Configuring the
format of user name
Configuring flow
traffic unit
Setting the TACACS
server response
timeout time
Setting the waiting
time before the
primary TACACS
server resumes the
active state
Setting the real-time
accounting interval