Dhcp Relay Fundamentals; Introduction To Dhcp Relay; Usage Of Dhcp Relay - 3Com 5500-SI Configuration Manual

11
Introduction to DHCP
Relay

Usage of DHCP Relay

DHCP Relay
Fundamentals
DHCP R
ELAY
This section contains an introduction to DHCP Relay
Early DHCP implementations assumes that DHCP clients and DHCP servers are on the
same network segment, that is, you need to deploy at least one DHCP server for each
network segment, which is far from economical.
DHCP Relay is designed to address this problem. It enables DHCP clients of multiple
networks to share a common DHCP server, through which DHCP clients in a LAN can
acquire IP addresses by negotiating with DHCP servers of other networks. It decreases
your cost and provides a centralized administration.
A DHCP relay can be a host or a switch that has DHCP relay service enabled.
Figure 35 illustrates a typical DHCP relay application.
Figure 35 Typical DHCP relay application
A DHCP relay works as follows:
A DHCP client broadcasts a configuration request packet in the local network
■
when it starts and initiates.
If a DHCP server exists in the local network, it processes the configuration request
■
packet directly without the help of a DHCP relay.
If no DHCP server exists in the local network, the network device serving as a
■
DHCP relay on this network appropriately processes the configuration request
packet and forwards it to a specified DHCP server located on another network.
When the DHCP server receives the packet, it generates configuration information
■
accordingly and sends it to the DHCP client through the DHCP relay to complete
the dynamic configuration of the DHCP client.
Note that such an interacting process may be repeated several times for a DHCP client
to be successfully configured.
C
ONFIGURATION