Configuring Self-Service Server Url - 3Com 5500-SI Configuration Manual

416 C 21: 802.1
HAPTER
Configuring Self-Service
Server URL
C
X ONFIGURATION
If the threshold is reached, the switch sends messages containing the user's
■
remaining online time to the client at the interval you configured.
The client keeps the user informed of the updated remaining online time through
■
a dialog box.
Perform the following configuration in ISP domain view.
Table 444 Enabling/disabling message alert
Operation
Enable messenger alert and configure the
remaining-online-time threshold and the interval at
which the alert message is sent
Disable messenger alert
Restore the messenger alert as the default setting
By default, messenger alert is disabled on the switch.
The self-service-url enable command can be used to configure self-service server
uniform resource locator (URL). This command must be incorporated with a RADIUS
server (such as a CAMS) that supports self-service. Self-service means that users can
manage their accounts and card numbers by themselves. And a server with the
self-service software is called a self-service server.
Once this function is enabled on the switch, users can locate the self-service server
and perform self-management through the following operations:
Select Change user password on the 802.1x client.
■
After the client opens the default explorer (IE or NetScape), locate the specified
■
URL page used to change the user password on the self-service server.
Change user password on this page.
■
Perform the following configuration in ISP domain view.
Table 445 Configuring the self-service server URL
Operation
Configure self-service server URL and configure the
URL address used to change the user password on the
self-service server
Remove the configuration of self-service server URL
By default, the self-service server URL is not configured on the switch.
Note that, if " " is contained in the URL, you must replace it with "
?
the URL in the command line.
The "Change user password" option is available only when the user passes the
authentication; otherwise, this option is in grey and unavailable.
Command
messenger time enable limit
interval
messenger time disable
undo messenger time
Command
self-service-url enable
url-string
self-service-url disable
" when inputting
|