Adding A User For Network Login - 3Com 5500-SI Configuration Manual

664 C C: A
HAPTER UTHENTICATING THE
Adding a User for
Network Login
S 5500
WITCH WITH
8 Select Submit.
9 Repeat step 1 through step 8 for each Switch 5500 on your network. When all of
the Switch 5500s have been added as clients to the Cisco Secure ACS server,
restart the Secure ACS server by selecting System Configuration from the left hand
side, then select Service Control and click Restart.
Existing users on a network with a Secure ACS server can be authorized using the
TACACS+ or RADIUS server. New users connected through a Switch 5500 to the
network need to be authorized using the RADIUS server. An optional VLAN and
QoS profile can be applied to the user.
Follow these steps to add a user for Network Login.
1 Select User Setup from the left hand side
2 Enter the username, and select Add/edit
3 Enter the user information, scroll down to complete the user profile, including
specific RADIUS attributes if required.
C S ACS
ISCO ECURE