Displaying And Debugging Udp Helper Configuration; Udp Helper Configuration Example; Ip Performance Configuration - 3Com 5500-SI Configuration Manual

5500 series
Hide thumbs Also See for 5500-SI:
Table of Contents

Advertisement

Displaying and
Debugging UDP Helper
Configuration
UDP Helper
Configuration Example
IP Performance
Configuration
After the above configuration, enter the
running of the UDP Helper destination server, and to verify the effect of the
configuration. Enter the
configuration.
Table 303 Displaying and Debugging UDP Helper Configuration
Operation
Display the destination server
corresponding to VLAN interface
Enable UDP Helper debugging
Disable UDP Helper debugging
Networking Requirement
The IP address of VLAN interface 2 on the Switch is 10.110.1.1, which is connected
with network segment 10.110.0.0. Set to relay-forward the broadcast packets with
destination IP of all 1s and destination UDP port 55 in the network segment
10.110.0.0 to the destination server 202.38.1.2.
Networking Diagram
Figure 77 Networking for UDP Helper Configuration
10.110.0.0
Ethernet
10.110.1.1
Sw itch ( UDP Helper )
Configuration Procedure
1 Enable UDP Helper function.
[SW5500]udp-helper enable
2 Set to relay-forward the broadcast packets with destination UDP port 55.
[SW5500]udp-helper port 55
3 Set the IP address of the destination server corresponding to VLAN interface 2 as
202.38.1.2.
[SW5500]interface vlan 2
[SW5500-Vlan-interface2]udp-helper server 202.38.1.2
IP performance is described in the following section.
Configuring TCP Attributes
TCP attributes that can be configured include:
synwait timer: When sending the syn packets, TCP starts the synwait timer. If
response packets are not received before synwait timeout, the TCP connection will
display
command in User View to debug UDP Helper
debugging
Command
display udp-helper server [ interface
vlan-interface vlan_id ]
debugging udp-helper { event | packet [ receive |
send ] }
undo debugging udp-helper { event | packet [
receive | send ] }
202.38.1.1
Internet

IP Performance Configuration 305

command in any view to display the
Serv er
202.38.1.2
Ethernet
202.38.0.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei5500g-ei

Table of Contents