Management Device
Configuration
Enabling System and
Port NDP
Configuring NDP
Parameters
Enabling System and
Port NTDP
Configuring NTDP
Parameters
Management device configuration involves:
Enable system and port NDP
■
Configure NDP parameters
■
Enable system and port NTDP
■
Configure NTDP parameters
■
Enable the cluster function
■
Configure cluster parameters
■
Configuring internal-external interaction
■
NM Interface for Cluster Management Configuration
■
Table 656 Enable system and port NDP
Operation
Enter system view
Enable system NDP
Enable port NDP
Enter the Ethernet port
Enable port NDP
Table 657 Configure NDP parameters
Operation
Enter system view
Configure holdtime of
NDP information
Configure interval of NDP
packets
Table 658 Enable system and port NTDP
Operation
Enter system view
Enable system NTDP
Enter the Ethernet port
Enable port NTDP
Table 659 Configure NTDP parameters
Operation
Enter system view
Configure the topology
collection range
Management Device Configuration 605
Command
system-view
ndp enable
ndp enable interface port-list
interface interface-type interface-number
ndp enable
Command
system-view
ndp timer aging
aging-in-seconds
ndp timer hello seconds
Command
system-view
ntdp enable
interface interface-type
interface-number
ntdp enable
Command
system-view
ntdp hop hop-value
Remark
—
Required
Optional
—
Required
Remark
—
Argument aging-in-seconds is the
holdtime of NDP information.
Argument Seconds is the interval of
NDP packets.
Remark
—
Required
—
Required
Remark
—
Optional
Argument hop-value is the hop range.