Ssh Server Configuration Example - 3Com 5500-SI Configuration Manual

206 C 15: SSH T
HAPTER ERMINAL
SSH Server
Configuration Example
S
ERVICES
Network requirements
As shown in Figure 49, configure a local connection from the SSH client to the switch.
The PC runs the SSH 2.0-supported client software.
Network diagram
Figure 49 Network diagram for SSH server configuration
P C P C
S S H C l i e n t S S H C l i e n t
Configuration procedure
1 Generate a local RSA key pair.
<S5500>system-view
[S5500] rsa local-key-pair create
If the local RSA key pair has been generated in previous operations, skip step 2.
2 Set authentication type.
Settings for the two authentication types are described respectively in :
Password authentication
■
RSA public key authentication
■
Password authentication
1 Set AAA authentication on the user interfaces.
[S5500] user-interface vty 0 4
[S5500-ui-vty0-4] authentication-mode scheme
2 Set the user interfaces to support SSH.
[S5500-ui-vty0-4] protocol inbound ssh
3 Configure the login protocol for the clinet001 user as SSH and authentication type as
password.
[S5500] local-user client001
[S5500-luser-client001] password simple aabbcc
[S5500-luser-client001] service-type ssh
[S5500] ssh user client001 authentication-type password
Select the default SSH authentication timeout time and authentication retry number.
After these settings, run the SSN2.0-supported client software on other hosts
connected to the switch. Log in to the switch using user name client001 and
password aabbcc.
S w i t c h S w i t c h
S S H S e r v e r S S H S e r v e r