Configuration Example Of Binding The Mac Address And Ip Address Of A Legal User - 3Com 5500-SI Configuration Manual

Configuration Example
of Binding the MAC
Address and IP Address
of a Legal User
To configure an address management IP address pool on GigabitEthernet 1/0/1,
allowing 20 IP addresses starting from 202.10.20.1 to 202.10.20.20 to access the
network, enter the following:
[S5500] interface GigabitEthernet 1/0/1
[S5500-GigabitEthernet 1/0/1] am ip-pool 202.10.20.1 20
Network requirements
The GigabitEthernet1/0/1 port of the switch is connected to multiple PCs.
Network diagram
Figure 13 Network diagram for address management
Configuration procedure
To configure to bind MAC addresses and IP addresses to GigabitEthernet 1/0/1, only
allowing a PC whose MAC address is 00e0-fc00-3900 to access the network by using
the IP address 202.10.20.30, enter the following:
<S5500> system-view
[S5500] interface GigabitEthernet 1/0/1
[S5500-GigabitEthernet 1/0/1] am user-bind mac-addr 00e0-fc00-3900
ip-address 202.10.20.30
Address Management Configuration Example
External network External network
Hub Hub
53