Rmon On Xrn - 3Com 5500-SI Configuration Manual

RMON on XRN

Networking Diagram
Figure 18 Networking Diagram of a Fabric
Configuration Procedure
Configure Switch A:
[SW5500]change unit-id 1 to 1
[SW5500]fabric-port gigabitethernet1/0/51 enable
[SW5500]fabric-port gigabitethernet1/0/52 enable
[SW5500]sysname hello
[hello]xrn-fabric authentication-mode simple welcome
Configure Switch B:
[SW5500]change unit-id 1 to auto-numbering
[SW5500]fabric-port gigabitethernet2/0/51 enable
[SW5500]fabric-port gigabitethernet2/0/52 enable
[SW5500]sysname hello
[hello]xrn-fabric authentication-mode simple welcome
Configure Switch C:
[SW5500]change unit-id 1 to auto-numbering
[SW5500]fabric-port gigabitethernet3/0/51 enable
[SW5500]fabric-port gigabitethernet3/0/52 enable
[SW5500]sysname hello
[hello]xrn-fabric authentication-mode simple welcome
Configure Switch D:
[SW5500]change unit-id 1 to auto-numbering
[SW5500]fabric-port gigabitethernet4/0/51 enable
[SW5500]fabric-port gigabitethernet4/0/52 enable
[SW5500]sysname hello
[hello]xrn-fabric authentication-mode simple welcome
In the example, it is assumed that the system will automatically change the unit IDs
n
of Switch B, Switch C and Switch D to 2, 3 and 4 after you choose
auto-numbering for unit-id.
Interconnected switches form a fabric if they all support the XRN function and are all
of the same type. The RMON configurations of the devices in a fabric are the same.
The RMON configuration performed on a device of a fabric will be automatically
synchronized to all devices in the fabric if the configuration does not conflict with
those of other devices in the fabric.
Fabric Fabric Fabric Fabric
S w itch A S w itch A S w itch B S w itch B
Fabric port Fabric port Fabric port Fabric port
S w itch C S w itch C S w itch D S w itch D
RMON on XRN
user port user port user port user port
83