Poe Profile Configuration; Poe Profile Configuration Tasks - 3Com 5500-SI Configuration Manual

27
ntroduction to
I
PoE Profile
PoE Profile
Configuration
PoE Profile
Configuration Tasks
P E P
O ROFILE
On a large-sized network or a network with mobile users, to help network
administrators to monitor the PoE features of the switch, 3Com Switch 5500 Family
have provided PoE Profile features.
Features of PoE Profile:
Various PoE Profiles can be created. PoE policy configurations applicable to
■
different user groups are stored in the corresponding PoE Profiles. These PoE
Profiles can be applied to the ports used by the corresponding user groups.
When users connect a PD device to the port that currently has PoE Profile stored,
■
the switch will automatically apply the PoE configuration defined in the
corresponding port's PoE Profile to the PD device.
This section contains information on PoE configuration
Table 615 describes PoE Profile configuration tasks.
Table 615 PoE Profile Configuration
Operation
Enter system view
Create PoE Profile
Configure Enable power
the relevant over Ethernet
features in
Configure PoE
PoE Profile
mode for
Ethernet ports
Configure the PoE
priority for
Ethernet ports
Configure
maximum power
for Ethernet ports
Quit system view
Under system view, apply the
existing PoE Profile configuration
to the specified Ethernet port
Enter Ethernet port view and
apply the existing PoE Profile to
ports
C
ONFIGURATION
Command
system-view
poe-profile profilename
poe enable
poe mode { signal | spare }
poe priority { critical | high | low
}
poe max-power max-power
quit
apply poe-profile profilename
interface interface-type
interface-number [ to interface-type
interface-number ]
interface interface-type
interface-number
apply poe-profile profilename
Description
—
Required.
Enter PoE Profile view
while creating PoE
Profile.
Required.
Optional.
By default, PoE mode is
set to be signal.
Optional.
By default, PoE priority is
set to low.
Optional.
By default, maximum
power is set to be 15,400
mW.
—
Required.
Users can decide
whether to configure the
settings under system
view or port view.