Tftp Lighting Procedure - 3Com 5500-SI Configuration Manual

TFTP Lighting Procedure

The switch can only act as a TFTP client.
Figure 146 Network diagram for TFTP configuration
S w itc h S w itc h S w itc h
The TFTP server and the TFTP client must be reachable to each other for the TFTP
function operates normally.
After TFTP client is enabled on an SWITCH 5500 switch, the seven-segment digital
LED on the front panel of the switch will rotate clockwise when the TFTP client (the
SWITCH 5500 switch) is downloading file from a TFTP server, and will stop rotating
when the file downloading is finished, as show in Figure 145.
Table 588 Download file from an TFTP server to the switch acting as an TFTP client
Device Operation
TFTP client Log into a remote
(SWITCH 5500) TFTP server, download
and save a remote file
to a local file
TFTP server Enable TFTP server
TFTP Lighting Configuration 521
N e tw o rk N e tw o rk
Command Description
tftp tftp-server get Required
source-file [ dest-file ]
— Required
For detailed configuration,
refer to the configuration
instruction relevant to TFTP
server.
P C P C