Setting The Unit Of Data Flows Destined For The Tacacs Server; Setting Timers Regarding Tacacs Server - 3Com 5500-SI Configuration Manual

Setting the Unit of Data
Flows Destined for the
TACACS Server
Setting Timers
Regarding TACACS
Server
Perform the following configuration in HWTACACS view.
Table 679 Setting the unit of data flows destined for the TACACS server
Operation
Set the unit of data flows destined for
the TACACS server
Restore the default unit of data flows
destined for the TACACS server
The default data flow unit is byte.
Setting the response timeout timer
Since HWTACACS is implemented on the basis of TCP, server response timeout or TCP
timeout may terminate the connection to the TACACS server.
Perform the following configuration in HWTACACS view.
Setting the response timeout timer
Table 680 Setting the response timeout timer
Operation
Set the response timeout time
Restore the default setting
The default response timeout timer is set to 5 seconds.
Setting the quiet timer for the primary TACACS server
Perform the following configuration in HWTACACS view.
Table 681 Setting the quiet timer for the primary TACACS server
Operation
Set the quiet timer for the primary TACACS server.
Restore the default setting.
By default, the primary TACACS server must wait five minutes before it can resume
the active state.
Setting a realtime accounting interval
The setting of real-time accounting interval is necessary to real-time accounting. After
an interval value is set, the NAS transmits the accounting information of online users
to the TACACS accounting server periodically.
Perform the following configuration in HWTACACS view.
Table 682 Setting a real-time accounting interval
Operation
Set a real-time accounting interval
Restore the default real-time accounting interval undo timer realtime-accounting
The interval is in minutes and must be a multiple of 3.
Configuring HWTACACS 619
Command
data-flow-format data { byte | giga-byte | kilo-byte |
mega-byte }
data-flow-format packet { giga-packet | kilo-packet |
mega-packet | one-packet }
undo data-flow-format { data | packet }
Command
timer response-timeout seconds
undo timer response-timeout
Command
timer quiet minutes
undo timer quiet
Command
timer realtime-accounting minutes