Configure Snmp - 3Com 5500-SI Configuration Manual

Table 616 MIBs Supported by the Switch (Sheet 2 of 2)
MIB attribute
Private MIB

Configure SNMP

The main configuration of SNMP includes:
■
■
■
■
■
■
■
■
■
■
■
■
■
MIB content
Configuration Management MIB
Flash Management MIB
System Management MIB
MIBs for LGMP Snooping
MIBs for DHCP Client
MIBs for DHCP Relay
MIBs for DHCP Server
MIBs for MSTP
Entity Environment MIB
Topology Management of Fabric
Support for Bulk Configuration of user and access
levels and trusted IP
MAC Address Management
QOS
QACL MIB
ADBM MIB
RSTP MIB
VLAN MIB
Device management
Interface management
Set community name
Set the Method of Identifying and Contacting the Administrator
Enable/Disable snmp Agent to Send Trap
Set the Destination Address of Trap
Set SNMP System Information
Set the Engine ID of a Local or Remote Device
Set/Delete an SNMP Group
Set the Source Address of Trap
Add/Delete a User to/from an SNMP Group
Create/Update View Information or Deleting a View
Set the Size of SNMP Packet Sent/Received by an Agent
Enable/Disable a Port Transmitting Trap Information SNMP Agent
Disable SNMP Agent
SNMP Configuration Introduction 565
References