Displaying The Source Ip Address Configuration - 3Com 5500-SI Configuration Manual

574 C 29: S
HAPTER OURCE
Displaying the Source
IP Address
Configuration
IP A C
DDRESS ONFIGURATION
Table 632 Configure source IP address for service packets (continued)
Operation
Specify source IP address for the SFTP
client
Specify source interface for the SFTP
client
If the ip-addr in the command is not an address of the device, your configuration fails.
If you specify a non-existent interface in the command, your configuration fails.
Use the display commands in any view to display the source IP address configuration
for service packets.
Table 633 Display the source IP address configuration
Operation
Display the source IP address of the FTP server
Display the source IP address of the FTP client
Display the source IP address of the TFTP client
Display the source IP address of the Telnet server
Display the source IP address of the SSH server
Display the source IP address of the SSH2 client
Display the source IP address of the SFTP client
Command
sftp source-ip ip-addr
sftp source-interface interface-type
interface-number
Command
display ftp-server source-ip
display ftp source-ip
display tftp source-ip
display telnet-server source-ip
display ssh-server source-ip
display ssh2 source-ip
display sftp source-ip
Remarks
Optional
Optional