Info-Center Configuration - 3Com 5500-SI Configuration Manual

Table 521 Info-Center-Defined Severity
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
Note that there is a slash between severity and digest.
6 Digest
The digest is abbreviation, it represent the abstract of contents.
Note that there is a colon between digest and content.
7 Content
It is the contents of logging information.
Info-Center The Switch supports six output directions of information.
Configuration
The system assigns a channel in each output direction by default. See Table 522.
Table 522 Numbers and Names of the Channels for Log Output
Output direction
Console
Monitor
Info-center loghost
Trap buffer
Logging buffer
snmp
The settings in the six directions are independent from each other. The settings will
take effect only after enabling the information center.
The Switch info-center has the following features:
Support to output log in six directions, that is, Console, monitor to Telnet terminal,
■
logbuffer, loghost, trapbuffer, and SNMP.
The log is divided into 8 levels according to the significance and it can be filtered
■
based on the levels.
The information can be classified in terms of the source modules and the
■
information can be filtered in accordance with the modules.
The output language can be selected between Chinese and English.
■
Description
Extremely emergent errors
Errors that need to be corrected immediately
Critical errors
Errors that need to be addressed but are not critical
Warning, there may be some types of errors
Information that should be noted
Common prompting information
Debugging information
Channel number Default channel name
0 console
1 monitor
2 loghost
3 trapbuf
4 logbuf
5 snmpagent
Logging Function 471