3Com 5500-SI Configuration Manual page 141

Configuring the option 184 supporting function in interface view
Table 130 Configure the option 184 supporting function in interface view
Operation
Enter system view
Enter interface view
Configure an IP address
for the interface
Configure the interface to
operate in DHCP server
mode and assign the IP
addresses of an
interface-based address
pool to DHCP clients
Configure the NCP-IP
sub-option
Configure the AS-IP
sub-option
Configure the voice VLAN
configuration sub-option
Configure the Fail-over
routing sub-option
Perform the operations listed in Table 130 if you specify to assign IP addresses of an
interface-based address pool to DHCP clients.
This method allows you to configure the option 184 supporting function for a specific
interface.
Option 184 Supporting Configuration 141
Command Description
System-view -
interface interface-type -
interface-number
ip address ip-address -
net-mask
dhcp select interface Required
dhcp server voice-config Required
ncp-ip ip-address
dhcp server voice-config Optional
as-ip ip-address You can configure this sub-option only
after you configure the NCP-IP sub-option.
dhcp server voice-config Optional
voice-vlan vlan-id { You can configure this sub-option only
enable | disable } after you configure the NCP-IP sub-option.
dhcp server voice-config Optional
fail-over ip-address You can configure this sub-option only
dialer-string after you configure the NCP-IP sub-option.