Sftp Configuration Example - 3Com 5500-SI Configuration Manual

SFTP Configuration
Example
1 Configure Switch B (SFTP server)
Displaying help information
You can display help information about a command, such as syntax and parameters.
Table 196 Display help information about SFTP client commands
Operation
Enter system view
Enter SFTP client view
Display help information about SFTP client
commands
Network requirements
As shown in Figure 51,
An SSH connection is present between Switch A and Switch B.
■
Switch B serves as an SFTP server, with IP address 10.111.27.91.
■
Switch A serves as an SFTP client.
■
An SSH user name 8040 with password S5500 is created.
■
Network diagram
Figure 51 Network diagram for SFTP configuration
PC PC
Configuration procedure
a Enable the SFTP server.
[S5500] sftp server enable
b Specify SFTP service for SSH user 8040.
[S5500] ssh user 8040 service-type sftp
Command
system-view
sftp { host-ip | host-name }
help [ command-name ]
Switch B Switch B
SFTP Server SFTP Server
IP address ： 10.111.27.91 IP address ： 10.111.27.91
SFTP Service 213
Description
-
-
Optional
Switch A Switch A
SFTP Client SFTP Client