3Com 5500-SI Configuration Manual page 655

Configuring auto VLAN and QoS for Funk RADIUS
To set up auto VLAN and QoS using Funk RADIUS, follow these steps:
1 Edit the dictionary file
RADIUS server are returned to the Switch 5500. The changes to make are:
a Add an R at the end of the correct attributes in the file, see example below.
The attributes will now appear as potential Return list attributes for every user.
2 After saving the edited
3 To use these return list attributes, they need to be assigned to a user or group.
Create a new user and add the return list attributes shown in Table 688.and
Table 689
Table 688 Summary of auto VLAN attributes
For Auto VLAN
Tunnel-Medium-type
Tunnel-Private-Group-ID
Tunnel-Type
Table 689 Summary of QoS attributes
For Auto QoS
Filter-id
so that Return list attributes from the Funk
radius.dct
file, stop and restart the Funk RADIUS service.
radius.dct
Return String
802
2
VLAN
Return String
profile=student
Setting Up A RADIUS Server
Comment
VLAN value
Comment
QoS Profile name
655