Device Management; Device Management Configuration - 3Com 4210 PWR Configuration Manual

44

Device Management

Configuration
Device Management
Configuration Tasks
Rebooting the Ethernet
Switch
Scheduling a Reboot on
the Switch
D
EVICE
Table 361 Device management configuration tasks
Task
"Rebooting the Ethernet Switch"
"Scheduling a Reboot on the Switch"
"Configuring Real-time Monitoring of the
Running Status of the System"
"Specifying the APP to be Used at Reboot"
"Upgrading the Boot ROM"
You can perform the following operation in user view when the switch is faulty or
needs to be rebooted.
n
Before rebooting, the system checks whether there is any configuration change. If
yes, it prompts whether or not to proceed. This prevents the system from losing
the configurations in case of shutting down the system without saving the
configurations
Table 362 Reboot the Ethernet switch
Operation
Reboot the Ethernet switch
After you schedule a reboot on the switch, the switch will reboot at the specified
time.
Table 363 Schedule a reboot on the switch
Operation
Schedule a reboot on the
switch, and set the reboot
date and time
Schedule a reboot on the
switch, and set the delay time
for reboot
Enter system view
Schedule a reboot on the
switch, and set the reboot
period
M
ANAGEMENT
Command
reboot [ unit unit-id ]
Command
schedule reboot at hh:mm [
mm/dd/yyyy | yyyy/mm/dd ]
schedule reboot delay {
hh:mm | mm }
system-view
schedule reboot regularity
at hh:mm period
Remarks
Optional
Optional
Optional
Optional
Optional
Description
Available in user view
Description
Optional
Optional
-
Optional