Displaying Udp Helper Information; Defining A Port And An Ip Forwarding Address; Removing A Port Or An Ip Forwarding Address - 3Com LANPLEX 2500 EXTENDEDPLEX®2500 EXTENDED User Manual

Displaying UDP
Helper Information
Top-Level Menu
system
ethernet
interface
fddi
route
display
atm
arp
define
bridge
atmArpServer
remove
ip
multicast
hopCountLimit
ipx
udpHelper
threshold
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
logout
statistics
Defining a Port and
an IP Forwarding
Address
Top-Level Menu
system
ethernet
interface
fddi
display
route
atm
arp define
bridge
atmArpServer
remove
ip
multicast
hopCountLimit
ipx
threshold
udpHelper
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
logout
statistics
Removing a Port or
an IP Forwarding
Address
Top-Level Menu
system
ethernet
interface
fddi
route
display
atm
arp
define
bridge
atmArpServer
remove
ip
multicast
hopCountLimit
ipx
udpHelper
threshold
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
logout
statistics
You can display the hop count and threshold configuration and list the
ports with their IP forwarding addresses that are defined for your LANplex
system.
To display UDP Helper information, enter the following command string
from the top level of the Administration Console:
ip udpHelper display
Example:
BOOTP relay hopcount limit is 4, BOOTP relay threshold is 0.
UDP port forwarding address
67 <158.101.1.112
You can define port numbers and IP forwarding addresses for the UDP
Helper. You may have up to 32 combinations of port numbers/IP forwarding
addresses per router. You may also have multiple IP address entries for the
same ports.
To define port numbers and IP forwarding addresses:
1 From the top level of the Administration Console, enter:
ip udpHelper define
2 Enter the port numbers and IP forwarding addresses you want to define.
You can remove a port number or IP forwarding address defined for UDP
Helper.
To remove a port number or IP forwarding address:
1 From the top level of the Administration Console, enter:
ip udpHelper remove
2 Enter the UDP port number that you want to remove.
3 Enter the IP forwarding address that you want to remove.
The port numbers and IP forwarding addresses you specified are
immediately removed.
Administering UDP Helper 9-19