Vodavi Starplus Triad-S System Programming Manual page 275

9-4
RULE 1
RULE 2
RULE 3
RULE 4
Technical Manuals Online! - http://www.tech-man.com
The Allow and Deny tables enable entries of either general or specific
allow and deny codes such as allowing all [1-800] type calls, and/or
denying all [1]+ or [0]+ calls. The Allow and Deny tables allow a maximum
of 8 digits to be entered as allow or deny digits. This enables entry of
certain area codes or office codes that can specifically be allowed or
denied. For example, the code [1-555-1212] may be entered in the Deny
Table to deny local toll information calls. Each Allow Table contains 20
bins for entry of allow codes. Each Deny Table contains 10 bins for entry
of deny codes.
Rules for Setting Up Allow/Deny Tables
Rule 1--- If both tables have no entries, no restriction is applied.
Rule 2--- If entries are made in the Allow Table and only there, then only
those numbers are allowed. All other dialing is denied.
Rule 3--- If entries are made in the Deny Table and only there, then only
those numbers are denied. All other dialing is allowed.
Rule 4--- If there are entries in both Allow and Deny tables, the Allow
Table is searched first, and if a match is found, it is allowed. If a match is
not found, the Deny Table is searched; if a match is found, the call is
denied. If number does not match an entry in either table, it is allowed.
Table 9-2: Allow / Deny Table
Allow Table Deny Table
No Entries No Entries
Entries No Entries
No Entries Entries
Entries Entries
A special Do Not Care character (D) may be entered to allow or deny
any digit dialed in that digit sequence.
Exception Tables Programming
Conditions and Results
Dialed No. A/D
Allow
Found A
Not Found D
Found A
Not Found
Dialed No. A/D
Found D
Not Found A
Found D
Not Found A