Exception Code Table; Route List Table - Vodavi Starplus Triad-S System Programming Manual

10-10

Exception Code Table

Route List Table

Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press EXCEPTION TABLES flexible button (FLASH 75, Button #3). The
following message displays:
EXCEP TION COD E TA B LE
EN TE R XX
= [0] to remove code from table, [1] to add code to table
XX = Exception codes for singl e digit codes, press MUTE button as 2nd digit.
(The [ ] may be entered as the 1st digit only.)
RR = Route Table Number 00–15
2. Press the HOLD button to save the entry. A confirmation tone is heard
and the display updates.
3. Press FLASH 75, Button #3 again for further entries. Up to
20 Exception Codes may be programmed in this table.
Description
The Exception Code Table is used for operator calls and any other calls
that use a one- or two-digit entry, rather than a three-digit area code.
Programming Steps
1. Press the ROUTE LIST TABLE flexible button (FLASH 75, Button #4).
The following message displays:
R OUT E LIST TAB LE
R R T GG D D
RR = Route List Table Number 00–15
T = Time Pe riod Route List 1–4
GG = CO Line Group 00–23
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
RR HOL D
L
LCR Operation