Print Station Attributes - Vodavi Starplus Triad-S System Programming Manual

Database Printing

Print Station Attributes

Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press the STATION ATTRIBUTES flexible button (FLASH 85,
Button #3). The following message displays:
P RIN T STATION S
P RE SS H OLD
2. To print data for:
All stations, press the HOLD button.
A specified Station Range, enter six digits to specify the Station
range (three digits for the first station and three digits for the last
station in the range):
[100-131] =
One station, enter that station twice: [101101]
3. Then press the HOLD button. The following message displays and the
requested information prints:
P RIN TI NG STAT ION S
When the system finishes sending the requested information to the
printer, a confirmation tone is heard.
Description
The Print Station Attributes command dumps the entire database as a
permanent record which can serve as a hardcopy of the database. The
system baud rate must match that of the printer or receiving device.
When printing the Station attributes the following data prints:
>>> All Current Station Parameters
Triad-S
12-9