Repeat Redial Timer; Additional System Timers Defaults - Vodavi Starplus Triad-S System Programming Manual

2-18
Program
Code
FLASH 02

Repeat Redial Timer

Technical Manuals Online! - http://www.tech-man.com
Table 2-2: Additional System Timers Defaults
Flex
Button
Additional System Timers
1 Repeat Redial Timer
2 ATD Display Timer
3 Call Coverage Ring Timer
4 Modem Answer Time-out
5 Pulse Dial Inter-Digit Timer
6 DTMF Time Operation
Programming Steps
1. Press the RPT REDIAL TIMER flex button (FLASH 02, Button #1). The
following message displays
R PT R ED IA L
06 0
2. Enter a valid number that corresponds to 006-999 seconds.
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
The Repeat Redial Timer lets a digital key station press a flexible button or
dial a code and redial a busy or no-answer number at specific intervals.
The user is signaled via a queue callback indication.
The Redial flexible button flashes at the callback rate of 120 ipm for
15 seconds.
If station does not answer within 15 seconds, the callback is
cancelled.
If station is busy with an internal/external call when the Redial queue
callback occurs, the callback occurs after the user goes on-hook.
By default, the Repeat Redial Timer is set for 1 minute (60) and is variable
from 006-999 seconds.
Feature
0 06- 99 9
Additional System Timers
Default
(after initialization)
060 seconds
01 seconds
5 seconds
25 seconds
300ms
100ms ON / 100ms OFF