Introduction; Calling Number / Name Display - Vodavi Starplus Triad-S System Programming Manual

Introduction

Introduction

Calling Number / Name Display

Technical Manuals Online! - http://www.tech-man.com
ICLID, or Caller ID, is a service provided from the telephone company.
Usually this service provides the number and name (not available in
some cases) of the calling party for identification prior to answering the
call. Calling party number and name are delivered in between this first
and second ring using FSK (Frequency Shift Key) format.
For this feature to operate properly, it must be activated from the Central
Office so the numbers or name, if available, of the calling party are
delivered over the individual tip and ring of the CO lines during the first
silent interval between ringing.
Whenever an incoming call is received at the system, the number
received with the ringing signal is stored in the line control tables and
used during the call processing.
If two lines are ringing at the same time, the display shows the oldest
line information. After one of the lines is answered, the display shows
the information on the unanswered lines.
The Triad-S System can use the Caller ID information to display the
number and/or name of the calling party on the system telephone
display. By default, the system displays the telephone number of the
caller. The system can be changed to display the name (if provided) in
place of the telephone number.
The system also offers a Number/Name Translation Table. This allows
numbers to be matched to names in a system table. If a name/number
from the telephone company matches an entry in the table, the name
programming in the table is presented in place of the name provided
from the telephone company.
00 00 00 00 01 11 11 11 1 11 22 22 2
12 34 56 78 90 12 34 56 7 89 01 23 4
5-3