Print Co Line Attributes; Co Line Ringing Assignments - Vodavi Starplus Triad-S System Programming Manual

Database Printing

Print CO Line Attributes

Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press the CO LINE ATTRIBUTES flexible button (FLASH 85,
Button #2). The following message displays:
P RIN T CO LIN ES
P RE SS H OLD
2. To print data for:
ALL CO Lines, press the HOLD button.
A specified CO Line Range, enter 6 digits (3 digits for the first line
and 3 digits for the last line in the range)
One CO Line, enter that line twice: [001001]
3. Then press the HOLD button. The following message displays and the
CO Line data prints:
P RIN TI NG CO LIN E S
When the system finishes sending the requested information to the
printer, a confirmation tone is heard.
Description
The Print CO Line Attributes command dumps the entire database as a
permanent record which can serve as a hardcopy of the database The
system baud rate must match that of the printer or receiving device.
When printing the CO Line attributes the following data prints:
All CO Line parameters within the specified range.
CO Line ringing assignments within the specified range.
Dial Pulse Ratio and Speed settings
12-7