4-16
CO Loop Pool Flex
Administration Access
Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press the CO LOOP POOL flexible button (FLASH 50, Page A,
Button #17). The following message displays:
CO LOOP POO L F LEX
D ISA BLE D
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disable
[1] = Enable
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The CO Loop Pool feature enables the station user to program CO Line,
Loop, and Pool Keys using flexible button programming. By default, this
feature is disabled.
Programming Steps
1. Press the ADMIN ACCESS flexible button (FLASH 50, Page A,
Button #18). The following message displays:
1. Press the ADMIN ACCESS flexible button (FLASH 50, Page A,
Button #18). The following message displays:
AD MIN ACCES S
D ISA BLE D
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disable
[1] = Enable
3. Press HOLD to save the entry. A confirmation tone is heard.
Page A Introduction
0- 1
0- 1