Vodavi Starplus Triad-S System Programming Manual page 299

10-12
Technical Manuals Online! - http://www.tech-man.com
Description
Each of the 16 Route List Tables available contains four Time Period
Routing Lists, one for each of the 4 daily start time periods. Within each
Time Period Route List up to 7 CO (outside) line groups and their
corresponding Insert/Delete table, if any, and LCR Class Of Service Priority
are programmed on a per line group basis.
When routing a CO call through LCR, CO Line groups are accessed in
sequence so that the first line group entered represents the least costly
(and first selected) and the last line group entered represents the most
costly (and last selected).
The Route List Table references many other tables when processing a call
for routing. First, the Daily Start Time Table is referenced to determined
what start time entry should be checked in the Weekly Schedule Table.
The corresponding entry in the weekly schedule table depending on the
day of the week then determines which Time Period Route List should be
used within the Route List Table.
The system then begins to check for idle lines in the first entered CO line
group and proceeds until an idle line is found. While it is searching for an
idle CO line the Station LCR COS is checked against the entries for LCR
COS Priority of the specific CO line groups (see LCR COS Priority
explanation).
When an idle CO Line is found with a LCR priority equal to or higher
than the stations LCR COS, then a final check is made to determine if
an Insert/Delete Table should be referenced.
When all of the tables and entries are checked the system then
processes the call on the outside CO line.
Make sure you made entries into all Time Period Route Lists
referenced in the weekly schedule table.
LCR COS Priority
A station should be assigned a class of service for LCR. The LCR COS can
be between 0 and 6, with 0 being unrestricted and 6 being the most
restrictive. Within the time period route List table, line groups are given
an LCR COS Priority assignment between 0 and 6.
LCR Operation