Vodavi Starplus Triad-S System Programming Manual page 256

UCD Announcement Tables
Technical Manuals Online! - http://www.tech-man.com
5. Dial [0-9].
0 = No DTMF Detection, No Messages Played. (Default)
1 = DTMF Detection, No Message.
2 = No DTMF, Place In Queue Message.
3 = DTMF Detection, Place In Queue Message.
4 = No DTMF, Hold Time Message.
5 = DTMF Detection, Hold Time Message.
6 = No DTMF, Both Messages.
7 = DTMF Detection, Both Messages.
8 = Not used at this time.
9 = Not used at this time.
6. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Clearing Entries
1. Press the [#] button.
2. Then press HOLD.
Description
Determines the type, index (port) number and message length for the
eight available Recorded Announcements (RAN). There are eight RAN
Tables that can be programmed. Table 1 can be the answer port for
unanswered incoming calls to a UCD group.
The type can be either a CO line port, an SLT port, Digital Voice Mail, or a
RAN Hunt Group port. The index number specifies which circuit for the
type of interface. The message length is used to match the maximum
length of the message to the device that is used.
Digital Voice Mail can be used as a RAN Announcer for UCD Groups. A
menu is provided to play the announcement, as well as collect DTMF
digits and route the caller to an alternate destination. In addition, a place
in queue and an average hold time message can be played to the caller.
The ability to detect DTMF, play average hold time, and place in queue
are all programmable in this area.
7-13