Vodavi Starplus Triad-S System Programming Manual page 301

10-14
Technical Manuals Online! - http://www.tech-man.com
2. Enter the table information as follows:
T T = Insert/Delete Table Number 00–19
X = [0] Pre-Delete numbers (first digits dialed in the number),
-or-
[1] Pre-Insert numbers (insert digits in front of number dialed,
-or-
[2] Post-Insert numbers (insert digits behind number dialed).
DDD = Digits (up to 16-digits may be deleted from the beginning
of the number dialed and up to 40 digits can be inserted
(20 pre and 20 post).
3. Press the HOLD button to save the entry. A confirmation tone is heard
and the display updates.
Adding and Deleting Numbers in the Same Table
1. Enter the different Insertion/Deletion tables in step 1.
2. Enter as separate entries using the same table number.
3. In the Insert Tables for LCR Programming, press the TRANS button for
a pause.
The [ ] and [#] digits are allowed as valid digits for inserting
digits dialed over the network.
The [ ] and [#] are valid entries for adding digits in both the pre
(in front of) or post (behind the number) tables.
The [ ] and [#] cannot be used as delete characters in the Delete
tables.
Deleting a Table
Enter a valid table number and press the HOLD button.
Description
Digits can be either added or deleted when dialing a number. For
instance, if a user dials a long distance call that should be placed on a
foreign exchange (FX) line, the digit [1] and the three-digit area code
(NPA) dialed by the user must be deleted before the call can be placed on
that FX line. An Insert/Delete table can be programmed to do this. Digits
can also be added to a number that has been dialed by the user.
LCR Operation