Default Lcr Database - Vodavi Starplus Triad-S System Programming Manual

LCR Operation

Default LCR Database

Technical Manuals Online! - http://www.tech-man.com
Description
The LCR Routing for Toll Information feature adds provisions to the LCR
call processing which allows common call routing for all toll information
calls. 1-(XXX) 555-1212, (XXX) 555-1212, 1-555-1212, and 555-1212 calls
are intercepted and sent to a selected route in the Route List Table.
Numbers dialed are integrated and if it is determined to be a toll
information call, either preceded with an area code or without or with a
leading digit 1 or not, the call is sent to the route designated in
programming.
By default, Toll Information Calls are sent to Route List Table Zero (0)
which allows toll information calls to be placed on the system at default.
A Toll Information route is chosen over a 3-digit or 6-digit route
assignment if both are assigned. Entering the pound key twice [##]
denies all Toll Information Calls.
Programming Steps
In an effort to decrease installation and set up time usually associated
with LCR, a default LCR database was incorporated.
Description
The default LCR database provides basic routing for local and long
distance dialing. Default entries have been made in the 3-Digit Table for
local office codes (NNXs) and all area codes (NPAs). Six routes have been
established with the default database for routing of all calls under
default.
10-19