Message Wait Reminder Tone - Vodavi Starplus Triad-S System Programming Manual

2-12

Message Wait Reminder Tone

Technical Manuals Online! - http://www.tech-man.com
2. Enter a valid number that corresponds to 005-100 seconds.
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
Single line telephones require the use of a DTMF receiver when going
off-hook and dialing. When SMDR or toll restriction (via COS
assignments) is enabled, a DTMF receiver monitors and screens the SLT
digits for the duration of this timer. By adjusting this timer, the system
administrator may free system DTMF receivers sooner if system SLT traffic
is heavy, or provide a longer monitoring period if toll restriction becomes
a problem.
Note that when LCR is enabled, the DTMF receivers are released when
the expected number of digits are dialed as entered in the LCR database.
By default, the SLT DTMF Receiver Timer is set at 20 seconds and is
variable from 005-100 seconds.
Programming Steps
1. Press the MESSAGE WAIT REMINDER TONE flex button (FLASH 01,
Button #13). The following message displays:
M / W TON E TIMER
00 0
2. Enter a valid number that corresponds to 000-104 minutes.
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
The Message Wait Reminder Timer determines the time between
repeated reminder tones to a key telephone with a message waiting.
Digital station users may be reminded of a message waiting on their
telephone with an audible signal presented at a timed interval.
By default, the Message Wait Reminder Tone is set at 000 (disabled) and is
variable from 000-104 minutes.
0 00- 10 4
System Timers