Name In Display; Baud Rate Display - Vodavi Starplus Triad-S System Programming Manual

5-6

Name in Display

Baud Rate Display

Technical Manuals Online! - http://www.tech-man.com
Description
The ICLID (Incoming Calling Line IDentification) feature was added to the
Triad-S System, and are unavailable unless the Basic ICLID Software
package was purchased separately. For this feature to operate properly, it
must be activated from the Central Office so the numbers of the calling
party are delivered over the individual tip and ring of the CO lines during
the first silent interval between ringing. By default, ICLID is disabled.
Programming Steps
1. Press the NAME flexible button (FLASH 56, Button #2) to determine
whether the name shows in the LCD display instead of the incoming
telephone number.
2. Enter a 0 or 1 on the dial pad.
[0] = Telephone number in display
[1] = Name in display
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can be set to display the incoming telephone number or the
person's name on the LCD display. By default, the system shows the
telephone number on the LCD display.
Programming Steps
The ICLID baud rate is programmed using FLASH 15 Baud Rate
assignments. The LCD displays the current baud rate based on which
number is assigned to the ICLID Port number.
When FLASH 56, Button #3 is pressed, an error tone is received.
Description
The Triad-S System can provide ICLID input on the standard RS-232C on
the optional MISU. The baud rate is displayed as 150, 300, 600, 1200,
2400, 4800, or 9600 baud. The default is 9600 baud.
ICLID Features