Voice Mail In-Band Features
Voice Mail Transfer / Forward
Technical Manuals Online! - http://www.tech-man.com
Description
The Voice Mail In-Band Digits feature enables and disables station
in-band signaling. Incoming CO callers can be Station Call Forwarded
into voice mail only when the ringing CO line is programmed to ring at
one station. CO lines programmed to ring at an Attendant station, call
forward into the voice mail system (if programmed to ring only at one
Attendant station). Callers are presented to the main greeting (not the
Attendant stations' mail box) even when ID digits are enabled. By default,
ID digits for incoming CO calls is enabled.
Programming Steps
1. Press the FORWARD TO VM GROUPS flexible button (FLASH 67,
Button #2). The following message displays:
FOR WA RD TO V M GR OU P S
EN AB LE D
2. Enter a 0 or 1 to Enable/Disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
The Voice Mail Transfer/Forward feature forwards voice mail calls, upon
reaching a forwarded to VM station, back into the voice mail unit. It is
useful when VM ports are being used as both Auto Attendant and VM
ports. This feature can be enabled/disabled for all VM groups. By default,
the VM Transfer/Forward feature is enabled.
0- 1
8-11