Trace Port Assignment; Baud Rate Display - Vodavi Starplus Triad-S System Programming Manual

PC / ACD Interface Trace

Trace Port Assignment

Baud Rate Display

Technical Manuals Online! - http://www.tech-man.com
Description
The PC/ACD Interface Trace provides a series of events trace output
which is compatible with the Discovery ACD Reporting package. By
default, the PC/ACD Event Trace is disabled (NO).
Programming Steps
1. Press the TRACE PORT ASSIGNMENT flexible button (FLASH 63,
Button #2) to determine the port to use for PC/ACD Interface Trace.
2. Enter a valid number for the PC/ACD Event Trace Port number:
[1] = Port #1 (MPB On-Board RS-232-C)
[2] = Port #2 (On-Board Modem)
[3] = Port #3 Serial Interface Unit (SIU2)
[4] = Port #4 Serial Interface Unit (SIU2)
The LCD displays the current baud rate based on which Port number
is assigned to the ACD SMDR Port number (default is Port #1).
ACD _ EV T _ TR ACE I/ O B AU D
N O
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
By default, the trace port assignment is set to 1.
Programming Steps
The PC/ACD Port Baud Rate is programmed using FLASH 15 baud rate
assignments. The LCD displays the current baud rate based on which Port
number is assigned to the ACD SMDR Port number. The following
message displays:
P ORT B AUD
1 96 00
1 96 00
6-21